This seller is the official distributor of the brand
Learn more about Bimedis TRUST
This seller had successful transactions
It’s Costs Starts Approximately at $200 and ends at the Highest Price $2,750
The electroencephalographic monitor should be capable of acquiring at least 16 channels of EEG. It should be able to check electrode impedance for each channel and the common mode rejection ratio should be at least 100 dB at 60 Hz.
Many electroencephalographic monitor configurations are available, and EEG monitors should be selected by facilities based on testing procedures and user requirements.
Users must be able to store the results on the hard drive or onto removable media.
Facilities should specify if whether the EEG monitor is based on a standard PC or it is a customized digital recording device.
EEG monitors should have a low-frequency filter setting of no higher than 0.3 Hz at its lowest setting, and the high-frequency filter setting should be no lower than 70 Hz at its highest setting.
The sampling rate to acquire the EEG signal should be at least 200 Hz; sampling rates of 256 to 400 Hz are preferred.
EEG monitor data should be acquired with a resolution of at least 12 bits. The sensitivity settings should be adjustable over the range of 1 to 100 mV/mm.
The EEG patient monitor should allow users to review an earlier section of the EEG recording, while real-time monitoring carries on.
The electroencephalographic monitor display modes should be offered as follows: compressed spectral array, density spectral array, and dot density array on EEG data trend graphs.
Does it include Graphic Recorder/Printer?
Are all electrode cables included?
Does it include a master switch?
Does it have individual channel override?
Master Notch Filter
Does it include a master notch filter?