The Edwards E1M18 pump is oil-sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a free-standing unit. The drive is provided through a flexible coupling by a single-phase.
The motors are totally enclosed and are cooled by the motor-cooling fan which directs air along the motor fins.
Manufacture Specifications:
50 Hz
20.5 m3h-1 / 12.1 ft3min-1
60 Hz
25.0 m3h-1 / 14.7 ft3min-1
Speed (Pneurop 6602)
50 Hz
17.0 m3h-1 / 10 ft3min-1
60 Hz
20.4 m3h-1 / 12.1 ft3min-1
Ultimate vacuum (total pressure)
without gas purge
3 x 10-2 mbar / 2.2 x 10-2 Torr
with gas purge
6.5 x 10-1 mbar / 4.8 x 10-1 Torr
Inlet connection
NW25
Outlet connection
Nozzle 15 mm external diameter removable from 3/4″ BSP tapped hole
Maximum permitted pressure at outlet
0.5 bar gauge / 7 psig
Maximum inlet pressure for water vapour
50 mbar / 38 Torr
Maximum water vapour pumping rate
0.65 kg h-1
Motor power 50/60 Hz
0.55 kW / 0.75kW
Nominal rotational speed 50/60Hz
1,440/1,720 rpm
Power connector
IEC EN60320 C19
Operating temperature range
13 - 40В°C
Noise
57 dB(A) @ 50 Hz
Oil capacity - maximum
1.4 litre
Oil capacity - minimum
0.9 litre
Recommended oil
Ultragrade 19