New NARANG HF1004

Standard Features:
› ICU Bed (7 function) with electrically operated back rest
tilting 0-70o, knee rest tilting 0-30°, trendelenbu rg tilting 0-12°,
Reverse trendelenburg tilting 0-12°, mattress base ( lateral )
tilting to the left up to 15°, tilting to the right up to 15°
› Outer dimensions L2240*W1060mm (±10mm)(Side rails
up), Mattress platform L1965*W920mm (±10mm), Bed
Height H530- 930mm (±10mm), Bed extension 200mm
(±10mm). All function controlled with TiMotion motor.
› Split Guard rails : Guard rail PP- 4pcs provides protection to
patient and additional side rails- 2 pcs near foot board offers
more safety and support to patient while standing.
› Angle Gauge on Side rails display's the angle of back rest,
Lateral tilt and Trendelenburg / Reverse Trendelenburg.
› Integrated Scale control panel : It is located at foot end and
is protected against impacts .
› Removable mattress platform : PP Plastic board mattress
platform can be easily removed for sterilization.
› With X-ray permeable PF backrest, Central nurse control
› Embedded controls on both sides of guard rails, Linen shelf
: At the bottom of foot end
› H/F boards locks : The board locks prevent accidental
removal of the bed boards when steering or handing the bed
› X-ray cassette holder: Sliding construction allows the
cassette to be inserted beneath the mattress platform from
the side of the bed.
› Manual/Electric CPR: The Electric CPR operates with one
key control. Manual CPR is equipped with damping device,
which can be used single handedly and allows the back rest
fall slowly to ensure the safety of the patient, in case of power
failure.
Electric Parameters :
Power supply : 220V/110V, 50HZ / 60HZ
Maximum input : 1.6A, 450VA
Protection against water and dust : IPX4
Equipment security classification : Class II
Level of protection against injury : Applied part type BF from
electrical current
Electric motor operation mode (load factor) : 10%, max. 2
min/18 min
BASIC FEATURES
Function : Seven
Outer dimensions (Side rails up) : L2240*W1060mm (±10mm)
Mattress platform : L1965*W920mm (±10mm)
Bed Height : H530-930mm (±10mm)
Bed extension : 200mm (±10mm)
Maximum backrest angle : ≥70°
Maximum thigh rest : ≥30°
TR/ATR : ≥12
Left and right tilt : ≥15°
Height of side rails (above mattress platform) : 440mm (±10mm)