PHILIPS BV Pulsera C-arm X-ray machine

Used,
Technical condition: very good,
Visual condition: very good,
Manufactured in Denmark,
Power supply: 230 V,
Frequency: 50/60 Hz,
PHILIPS BV Pulsera is a powerful mobile fluoroscopy system for the most demanding surgical and interventional procedures. It can operate continuously even for the longest invasive procedures. The rotating anode technology and automatic deep penetration mode give you the ability to x-ray patients of virtually any weight and see the finest detail with projections from different angles,
The ultra-compact mobile station fits perfectly into the surgical process. The Mobile View Station's unique smart viewing concept provides the user with easy transportation, easy and intuitive system setup and optimal viewing capabilities,
Equipped with a 12-inch image intensifier, it can handle the most advanced procedures, as well as all routine and special procedures:

Cardiovascular procedures (peripheral/abdominal/cerebral),
Orthopedic surgery (fractures, fixation),
Abdominal surgery (cholangiography, urological studies),
Neurosurgical procedures (pain management, vertebroplasty),
Thoracic surgery,


Specifications:

X-ray tube:

Tube type: Rotating anode,
Anode diameter: 2.8 in,
Anode angle: 10°,
Nominal focal lengths: 0.3 mm and 0.6 mm,
Nominal X-ray tube voltage: 120 kV,
Maximum anode heat content: 222 kj = 300 kHU,
Inherent filtration: 1.0 AI eq.
Additional filtration: 3 mm AI + 0.1 mm Cu,


Collimator assembly:

Iris collimation with dual opposing lead apertures allowing elliptical, circular and rectangular collimation,
Minimum beam size < 5 X 5 cm²,
Aperture and shutters are infinitely variable,
All functions remotely controlled from the C-arm control panel,


X-ray generator:

Generator type: 80 KHz high frequency inverter, constant potential (CP) generator, microprocessor controlled,
Max. Generator power: 7.5 kW,
Max. X-ray tube voltage: 120 kV,
Max. x-ray tube current: 100 mA,




Continuous fluoroscopy:


KV range: 40 to 120 kV,
mA range for low-dose fluoroscopy mode: 0.10 to 8.3 mA (up to 10 mA during Auto High Penetration),
mA range for high-dose fluoroscopy mode: 0.24 to 20.0 mA,

Pulsed fluoroscopy:

KV range: 40 to 120 kV,
Peak mA range: 0.4 to 12 mA,
Pulse width: 24, 40 ms,
Pulse: 12.5 s,


Half dose fluoroscopy:

KV range: 40-120 kV,
Peak mA range: 0.4 - 12 mA,
Pulse widths: 10, 16.6, 24 and 40 ms,
Pulse: 12.5 s,


Quarter dose fluoroscopy:

KV range: 40-120 kV,
mA peak range: 0.4 - 12 mA,
Pulse widths: 10, 16.6, 24 and 40 ms,
Pulse: 6.25 s,


Pulsed exposure:

kV range: 40-120 kV,
Peak mA range: 2.0 - 60 mA,
Pulse widths: 8.0, 9.5, and 11.1 ms,
Pulse frequency: 3-30 per second,


Sharp shot:

KV range: 40 - 110 kV,
mA range: 0.9 to 75.0 mA,
Time range: 120 ms to 460 ms,


Radiography:

kV range: 40-110 kV,
mA range: 60 mA constant,
mAs range (R'10 series from ISO 497): 3.2 toa 125 mAs,


360° detection:

Image intensifier type: triple mode 12