Used Very Good CAMAG ATS4

Everything what you see in the pictures is included in the price (consumables, PC+ software,lab chair, accesories); PS: the bench desk is not included.

Product Description

Automatic Sample Application Is A Key Factor For Productivity Of The Hptlc Laboratory. The Ats 4 Offers Fully Automated Sample Application For Qualitative And Quantitative Analyses As Well As For Preparative Separations. It Is Suited For Routine Use And High Sample Throughput.

Fully Automated Application Of Samples With The Ats 4, Samples Are Either Applied As Spots Through Contact Transfer (0.1–5 μL) Or As Bands Or Rectangles (0.5 To > 50 μL) Using The Spray-on Technique. Starting Zones In The Form Of NarrowBands Offer The Best Separation Attainable With A Given Chromatographic System. Application In The Form Of Rectangles Allows Precise Application Of Large Volumes Without Damaging The Layer.Prior To Chromatography, These Rectangles Are Focused Into Narrow Bands With A Solvent Of High Elution Strength. The Ats 4 Allows “Overspotting”, I.E. A Sequential Application From Different Vials Onto The Same Position. This Technique Can Be UsedE.G. In Pre-chromatographic Derivatization, Spiking, Etc.

Key Features:

Fully Automated Sample Application

Application Of Bands, Spots Or Rectangles

Any Plate Format Up To 20 X 20 Cm

Spray-on Application Or By Contact Transfer

Software-controlled By Visioncats

Heated Spray Nozzle (Option)

Technical Specifications

Object support: For objects up to 20 x 20 cm

Stage drive:

X-drive (turret) Stepper motor 1600 steps/rev. 4 steps = 0.1 mm Maximum speed 200 mm/s with acceleration ramp Positions programmable: 5.0 – 195.0 mm in 0.1 mm steps
Y-drive (stage) Step motor 3200 steps/rev. 8 steps = 0.1 mm Maximum speed 200 mm/s with acceleration ramp Positions programmable: 5.0 – 195.0 mm in 0.1 mm steps

Dosage syringe drive: Stepping motor 1600 steps/rotation 100 nL = 120 steps with 100 µL syringe or 24 steps with 500 µL syringe

Sample dosage: Choice of 10, 25 or 100 µL gas-tight syringe with side port. Dosage volume 100 nL to 1 mL in increments of 100 nL

Syringe drive: Stepper motor 1600 steps / rev.: 100 nL = 960 steps for 10 µL syringe 100 nL = 384 steps for 25 µL syringe 100 nL = 96 steps for 100 µL syringe

Rack: For 66 sample vials 2 mL (12 x 32 mm)

Mains voltage: 85 – 250 V~ 47 – 63 Hz 60 VA

Gas supply: 4.5 - 6 bar (65 - 87 psi), preferably nitrogen. Consumption 0.2 - 0.3 L/min for contact or 0.8 – 2.0 L/min for spray-on application (pressure dependent)

Dimensions (W x D x H): 630 x 530 x 500 mm

Weight:36 kg