Wavefront Technology, Hartman-Shack Micro-Lenslet Array.nn
Features
nn
nn - Color screen movable touch. 7-inch LCD touchscreen, bright and contrast. The resulting image has a high resolution. The tilt of the monitor can be adjusted, which allows the resulting image to be independent of the viewing angle.
nn - The measurement speed is very high, in comparison with other similar devices.
nn - The printer is quiet and fast. The thermal printer is automatic, with the function of auto-cutting paper. A new advantage of the autorefkeratometer is the replacement of paper in one motion.
nn - When measuring aberrations, getting more data. HRK-8000A has the ability to measure fourth-order aberrations, which so far has been available only to wavefront aberrometers. Based on the obtained data, a high and low order graphical Zernike refraction map is constructed, which gives a more complete picture of the eye condition of the patient under study, and allows you to prescribe the best and most accurate treatment.
nn - The modes - color and landing contact lenses. Using the full-color camera used in this device, you can see what was previously possible only with the help of a slit lamp: the eye, contact lens and its landing. The HRK-8000A autorefkeratometer for the first time in the world applied contact lens landing mode using color filters and a fluorescent solution.
nn - Contact lens fit and necessary curvature are measured and analyzed automatically.
nn - 3D auto search. The device can move in three planes, and also has an ultra-sensitive sensor. This gives him the opportunity to automatically find the focus of the eye and take the necessary measurements.
nn
nn
Specifications:
nn
nnnnnnMeasuring modes | nnK/R Mode | nnRefractory keratometer mode | nn
nnnnREF Mode | nnRefractometric mode | nn
nnnnKER Mode | nnKeratometer mode | nn
nnnnCLBC Mode | nnMeasuring mode of basic CL curvature | nn
nnnnKER P Mode | nnKeratoperiphery mode | nn
nnnnColor View Mode | nnColour inspection and contact lens fit control mode | nn
nnnnRefractometry | nnVertex distance (VD) | nn0.0,12.0,13.5,15.0 | nn
nnnnSphere(SPH) | nn-30.00~ 25.00(VD-12)(Step: 0.01,0.12,0.25) | nn
nnnnCylinder | nn0.00±10.00 (Step: 0.01,0.12,0.25) | nn
nnnnAxis | nn0-180˚ (step 1˚) | nn
nnnnCylinder shape | nn-, ,± | nn
nnnnCenter-to-centre distance (PD) | nn10~85mm. | nn
nnnnMin. pupil diameter | nn2.0mm. | nn
nnnnKeratometry | nnRadius of curvature | nn5.0~13mm: 0.01) | nn
nnnnCorneal power | nn25.96~67.50D: 0.01,0.12,0.25) | nn
nnnn(at the equivalent of the cornea to the refractive index 1.3375) | nn
nnnnCorneal astigmatism | nn0~15.00D: 0.05,0.12,0.25) | nn
nnnnAxis | nn0-180˚ (step 1˚) | nn
nnnnPupil diameter, irises | nn2.00~14.00 (Step: 0.1mm) | nn
nnnnMemory | nn10 latest measurements for each eye | nn
nnnnOther | nnScreen | nn7 inch LCD touch screen with tilting function | nn
nnnnBuilt-in printer | nnThermal printer with auto-cutting | nn
nnnnEnergy Saving | nnAuto Power Off (5min) | nn
nnnnPower supply | nn100-240V, 50/60Hz, 60W | nn
nnnnDimensions/mass | nn262x518x441mm / 20.9kg | nn
nnnn
nn nn