DWX-4W is One of The Best Selling Wet Dental Mills. The Current Price Range Based on Bimedis Vendors. Roland DWX-4W Costs Starts Approximately at $13,441 and ends at the Highest Price $20,161. The Average Price for Roland DWX-4W - $16,801.
Roland DWX-4W Maximum Retail Price (MRP) - $29,445
External Dimensions: 480 (W) x 538 (D) x 599 (H) mm
The following amount of space is required as a minimum for the installation.
Installation Space: 0.6 x 1.0 m
Work Space: 1.1 x 1.5 m
You can attach standard block material to the DWX-4W as shown below.
You can mill dental prosthetic ceramics such as glass ceramics or composite resins.
*Workability is subject to the physical properties of the material. Please contact your dealer or the material manufacturers for details.
No you can't.
You cannot attach disk material to the DWX-4W.
Operating System: Windows 7/8/8.1/10 (32,64-bit edition)
CPU: The minimum required CPU for the operating system
Memory: The minimum amount of required RAM for the operating system
Optical Drive: CD-ROM drive
Video Card and Monitor: At least 256 colors with a resolution of 1,024 x 768 or more recommended
* For the latest information, see the Products website.
RML-1 and NC code
* The milling data created by supported CAM software can be used.
VPanel and Windows driver are bundled. VPanel is a program to operate the DWX-4W on your computer screen. It has functions to output milling data, perform maintenance, and make various corrections. In addition, it displays error messages of DWX-4W. Windows driver is a program to control the milling machine through your PC.
CAM software is developed by our partner companies. Please find details in the dental partner page.
The DWX-4W is compatible with the NC code (G code).
* The NC code (G code) commands created by supported CAM software can be used.
It is possible if you send a drilling command from your CAM software.
No, please use the ZGB-D milling burrs.
USB connection (compliant with Revision 1.1). A USB cable is included. The USB3.0 cable cannot be used.
The use of USB hubs are not supported. If a USB hub is used, there is a possibility that the machine will not function.
The cable included is 3.0 meters long. It is recommended to use the bundled cable for the DWX-4W.
The machine makes an emergency stop as a safety measure, where the milling is suspended.